VetteMOD.com

VetteMOD.com (http://www.vettemod.com/forum/index.php)
-   Parts & Cars For Sale (http://www.vettemod.com/forum/forumdisplay.php?f=27)
-   -   DIY Jeep Steering Conversion Parts (http://www.vettemod.com/forum/showthread.php?t=10962)

72LS1Vette 07-16-2015 11:00 PM

DIY Jeep Steering Conversion Parts
 
I started putting together a Jeep steering conversion but I eventually bought a Borgeson setup. This is most of the parts needed for a DIY conversion. You will still need hose, a U-joint or rag joint and a pittman arm.

The brackets were made from drawings posted on the forum and are 2 pieces of 1/4" thick aluminum screwed together. Tig-welding them would be even better. I have grade 5 bolts holding them on to the box but they should be replaced with the metric equivalent of grade 8.

I got the steering box at the local self-serve junkyard. This one looked like a recent replacement and wasn't rusted like the others.

I'm asking $150 + shipping for everything. Basically just trying to get back the $ invested in the parts (those fittings are expensive). Send me an email if interested. [Only registered and activated users can see links. Click Here To Register...]

:beer:

Rick B.

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]

bazza6977 07-20-2015 10:32 AM

email sent

bazza6977 09-04-2015 04:42 AM

Well I would have bought it if he had replied

bazza6977 11-27-2015 12:24 PM

well he did reply , so I bought it !!!!:cool:


All times are GMT. The time now is 03:15 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.