Thread: 12 bolt
View Single Post
  #7  
Old 08-08-2020, 03:10 PM
rtj's Avatar
rtj rtj is offline
United States | Addict
 
Join Date: Nov 2011
Posts: 2,029
My Photos: ()
Default

I ordered two sizes, same dia, but standard and high misalignment.



Went with the standard. These are my bushing/adapters.



Need to clamp the ta to the mill and take 30 thou off the radius about 1.25 inches down.

Last edited by rtj; 08-08-2020 at 03:12 PM..
Reply With Quote