View Single Post
  #1  
Old 07-16-2015, 11:00 PM
72LS1Vette 72LS1Vette is offline
United States | n00b
 
Join Date: Mar 2009
Location: North Easton, Mass.
Posts: 1
My Photos: ()
Default DIY Jeep Steering Conversion Parts

I started putting together a Jeep steering conversion but I eventually bought a Borgeson setup. This is most of the parts needed for a DIY conversion. You will still need hose, a U-joint or rag joint and a pittman arm.

The brackets were made from drawings posted on the forum and are 2 pieces of 1/4" thick aluminum screwed together. Tig-welding them would be even better. I have grade 5 bolts holding them on to the box but they should be replaced with the metric equivalent of grade 8.

I got the steering box at the local self-serve junkyard. This one looked like a recent replacement and wasn't rusted like the others.

I'm asking $150 + shipping for everything. Basically just trying to get back the $ invested in the parts (those fittings are expensive). Send me an email if interested. blair.richard@comcast.net



Rick B.

[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]
Reply With Quote