75 Corvette Resto Mod

Headlights

I actually was able to get in touch with the gentleman at sickhids.com and he isn't cheap but sounds like he makes every set of headlights custom to your specific build. There is also corvetteHID.com and they seem to be working on HID projector headlights for the C3 as well. Apparently they recently decided to pick the project back up after dropping it for a while.
 
Hood Struts

Here is an image of the numbers on the struts used on my hood application.
 

Attachments

  • IMG_20130611_110527_616.jpg
    IMG_20130611_110527_616.jpg
    172.9 KB · Views: 55
Here is an image of the numbers on the struts used on my hood application.
Might be a StrongArm 4524.
16.31 extended, 10.83 compressed, makes sense.
Could find only one mention of the lift: allegedly 75 lbs.
If it's the right spring, that would mean your setup uses twice the lift the guy on CF does.
Surprising.
 
Here is an image of the numbers on the struts used on my hood application.
Might be a StrongArm 4524.
16.31 extended, 10.83 compressed, makes sense.
Could find only one mention of the lift: allegedly 75 lbs.
If it's the right spring, that would mean your setup uses twice the lift the guy on CF does.
Surprising.

Very possible. I don't know much about those things though.
 
the Z06 should have DRL so check again , might be better to remove it from the wiring harniss like Jeff showed.... might look different on the Vette than on the Camaro.....

nice "butt" .... I lke the bumper mod for these tailpipes !!!

262851adf53696c88.jpg
 
Last edited:
the Z06 should have DRL so check again , might be better to remove it from the wiring harniss like Jeff showed.... might look different on the Vette than on the Camaro.....

nice "butt" .... I lke the bumper mod for these tailpipes !!!

262851adf53696c88.jpg

Thanks! I like how the bumper turned out as well :drink:

I don't have the auto headlights from a Z06 (I didn't use the Z06 wiring). It is an aftermarket kit. I wonder why Jeff's lights burned out so to speak because of the DRL... If my car did have DRL I wonder if it would matter since all of my lights are now LED's. :confused:
 
I don't have any good pictures of the exhaust up in the car (mostly because the car has been on the ground so I cannot get under it to take the shots).

I do however have pics of the exhaust after it was built, installed for fit and then removed. I will try to get pics of it in the car as soon as I can.

thum_262851c0535bc5b89.jpg

thum_262851c0536f1b517.jpg
 
I don't have any good pictures of the exhaust up in the car (mostly because the car has been on the ground so I cannot get under it to take the shots).

I do however have pics of the exhaust after it was built, installed for fit and then removed. I will try to get pics of it in the car as soon as I can.

thum_262851c0535bc5b89.jpg

thum_262851c0536f1b517.jpg

That will do, awesome setup.
 
I don't have any good pictures of the exhaust up in the car (mostly because the car has been on the ground so I cannot get under it to take the shots).

I do however have pics of the exhaust after it was built, installed for fit and then removed. I will try to get pics of it in the car as soon as I can.

thum_262851c0535bc5b89.jpg

thum_262851c0536f1b517.jpg

That will do, awesome setup.

This exhaust system uses the same butterfly shutter system a Z06 used. I'm curious to see if it makes much difference at all in overall sound output when they are closed like the stock system. Biggest issue I see is that these cans are much smaller than the stock Z06 cans so I wonder.
 
Does anyone have any insight as to where I might find a nice set of LED tail lights that still have the reverse lights? Not using the stock lens and sticking a LED bulb in there.
 
Headlights

Got my headlights in and in the car. They are going to look pretty sweet!

What do you think?

thum_262852d9383b0a382.jpg

thum_262852d93848ddc35.jpg

thum_262852d9385de9d8f.jpg

thum_262852d9386d93e80.jpg

thum_262852d9387d4f854.jpg

thum_262852d9392fdb285.jpg

thum_262852d938917c98b.jpg

thum_262852d9389f652c4.jpg
 

Attachments

  • 1-16-14 headlights 012.jpg
    1-16-14 headlights 012.jpg
    275.5 KB · Views: 9
  • 1-16-14 headlights 008.jpg
    1-16-14 headlights 008.jpg
    313.3 KB · Views: 10
  • 1-16-14 headlights 005.jpg
    1-16-14 headlights 005.jpg
    325.4 KB · Views: 10
  • 1-16-14 headlights 004.jpg
    1-16-14 headlights 004.jpg
    303.1 KB · Views: 10
  • 1-16-14 headlights 003.jpg
    1-16-14 headlights 003.jpg
    311.4 KB · Views: 13
Last edited:
I was hoping to be much further along at this point than I currently am. I was thinking the car would be painted before 2014, but we are being held up by the guy doing the computer work. Need the BCM in order to fiberglass it into the car, but not having luck getting a response from the computer guy.
 
those lights will look awesome at night time. do you have the inner halo portion wired as day light running lights? I am thinking of doing that on my mga coupe project.
 
Top