|
|
 |
|
 |
|
#11
07-29-2010, 11:46 PM
|
||||
|
||||
To the OP: FWIW, I recall a buddy of mine with a '68 Camaro small block. He tried to put an HEI distributor in his, and the firewall modifications (via ballpeen hammer) still didn't make it clear. I'm assuming the '69 firewall is similar to a '68, and a bigblock would only make things worse.
Just my speculation. 
|
|
#12
07-30-2010, 12:42 AM
|
||||
|
||||
|
Acording to the dimensions in the Chevy Power book, the dimension from the bellhousing mount face to the distributor center line, a SBC=2.18" and BBC=2.20". Sounds like a problem for both.
__________________
Have you voted for VetteMOD today? [Only registered and activated users can see links. Click Here To Register...] to vote for the best site around
|
|
#13
07-30-2010, 02:17 PM
|
|||
|
|||
|
Thanks for the replies, it won't fit without some major fine tuning of the firewall with an 8 pound "persuader"! Found a shop in Nevada that transforms the stock points style distributor into an HEI style unit with external coil.
|
|
#15
07-30-2010, 02:23 PM
|
||||
|
||||
|
Years ago there was an adaptation of the Chrysler SS ign setup to the GM dizzy, I think it used the GM points too, if memory serves.....
I dunno if it's any advantage.... 
__________________
GENE When the .gov fears the people, there is LIBERTY, when the people fear the .gov there is tyranny ... "Sure, there are some bad Republicans, but there are no good Democrats." Liberalism - Childlike emotionalism applied to adult issues I have a little list, let ALL of them be MIST...... [Only registered and activated users can see links. Click Here To Register...] [Only registered and activated users can see links. Click Here To Register...]
|
 |
| Thread Tools | |
|
|
 |
 |
|
The Artist formerly known as Turbo84
