Guldstrand caliper brackets: C3 Vette to 12 bolt

69427

The Artist formerly known as Turbo84
Joined
Mar 30, 2008
Messages
2,972
Location
Clinging to my guns and religion in KCMO.
Cleaning out the garage and have a set of caliper brackets that I bought several years ago for my street rod. These brackets adapt C3 calipers to Chevy 12 bolt rear ends (using Corvette rotors). I'll confess I'm not a live axle expert to know if the backplate pattern is the same for 12 bolt and 10 bolt rear axles, too. These were just bolted to the axle for a couple years while the vehicle was being built (no miles), but I later pulled the axle out and put a C4 suspension under it instead.

IM001548.jpg

They're 3/8" thick, and threaded in the two caliper attachment points.

I'm asking $20 plus shipping (these should fit in one of the $4.95 boxes at the Post Office) before I advertise these later on another site for $25 plus shipping.

Thanks,
Mike
 
Top