front end finish up...

so I spent the money on the Viking DA rear shocks and DA front coilovers I went with 700 lb/inch (had 750 too stiff now 550 to light) ... I pulled my tubular lower control arms off the shelf and need to get them ready by cutting off the spring pocket and welding on sway bar tabs... I called coleman racing and got a new set of 11.75x1.25 slotted light weight strait vane rotors but this time I splurged for the floating style and Tbolts to float them on my hubs... I also called up wilwood and got a set of polymatrix Q pads for the front to match the rear pads cause "E" work great for the track but are too aggressive and up a set of rotors... new moog lower ball joints just because... and i should be done with the chassis... or so I keep telling myself...

I will post pics as the work progresses over the next couple weeks...

I need to get this damn corvette done so I can get back on the GMC 4x4.... :smash::smash::smash::smash::smash::smash::smash::smash::smash::smash::banghead::banghead::banghead::banghead::banghead: