COLE SWEAT
Well-known member
- Joined
- May 8, 2013
- Messages
- 142
Has anyone made these adjusters for a c3 and how do they work?
Do they replace the pivot bolt?
Do they replace the pivot bolt?
Has anyone made these adjusters for a c3 and how do they work?
Do they replace the pivot bolt?
what size is the pivot bolt?
I couldn't see the pics but what is the 1" drill bit for? are you making the hole in the frame 1"?
do you install a washer between the adjuster and the johnny joint? maybe a fender washer ?
I took your advice and loaded a photobucket fix. Works like a charm. Thanks
I currently have the body off, going through the frame (gussets, welding seams) so I want to get it all done before I paint the frame.
going to be using the Vansteel double offset trailing arms with johnny joints along with a 300lb shortened spring. was looking to raise the pivot point 1 1/2". I read some were that raising the pivot point will get rid of some of the squatting.
Van Gordon Raising built my bb ls6 for me with full roller. should have loads of hp.
also he made me a th400 with a 2500 stall. So I don't want the ass end to sit on the ground when I take off.
What would you think of welding a plate on each side of the kick ups before I drill my 1" holes?
I took your advice and loaded a photobucket fix. Works like a charm. Thanks
I took your advice and loaded a photobucket fix. Works like a charm. Thanks
Please forgive the post hijack, but can you elaborate on that a bit? Thx.
I searched for "photobucket fix for chrome". There was a couple of different fixes. Sorry I can't remember which one.I took your advice and loaded a photobucket fix. Works like a charm. Thanks
Please forgive the post hijack, but can you elaborate on that a bit? Thx.