i going to start fighting the rust.

turtlevette

The Turdle
Joined
Mar 24, 2008
Messages
1,492
Location
Marshfield, MA
i was thinking just spray the whole undercarriage with PB blaster. Should take about 10-15 minutes.

i'm not in to anything anal retentive like painting the frame with POR.
 
Use LPS-3. It's sticky so it'll also collect all the dust and dirt, adding another layer of protection.
 
I just spray the inside of my frame once a year or so. A product by Wynns called "Visocene"[sp?]. It applies like an oil and the coagulates" to a grease once it has set a while. Kinda greasy but keeps the water off the surfaces.
 
I just spray the inside of my frame once a year or so. A product by Wynns called "Visocene"[sp?]. It applies like an oil and the coagulates" to a grease once it has set a while. Kinda greasy but keeps the water off the surfaces.

There IS a weep hole in the middle LO back end of the frame, just below the t/arm pivots, and on bottom of the end cap....gotta make sure that is clean....

:tomato::rain:
 
years ago the tranny leaked pretty good. with the oil hitting the exhaust the frame got a pretty good oil fog on it.


that PB blaster shit creeps pretty good though. It stinks like hell for a day.
 
Top