Go Back   VetteMOD.com > VetteMOD General Discussion > Projects

Reply
 
Thread Tools
  #101  
Old 10-13-2017, 03:43 PM
rtj's Avatar
rtj rtj is offline
United States | Addict
 
Join Date: Nov 2011
Posts: 1,165
My Photos: (10)
Default

People are saying those Chinese heads are structurally sound now, they would lose rocker arm studs years ago (and big chunks of Alum with them). Hopefully, you've gotten through all the problems.

Interested to see how it runs and driving impressions.
Reply With Quote
  #102  
Old 10-16-2017, 04:26 AM
SuperBuickGuy's Avatar
SuperBuickGuy SuperBuickGuy is offline
United States | Addict
 
Join Date: Jul 2012
Location: Seattle, WA
Posts: 1,861
My Photos: (0)
Default

I have kind of an ace on those heads - a machinist who is a friend.... he pointed out the only thing I should have done different.... bought them bare then filled them with my parts... but the casting and the machining is most definitely okay.... lots of sharp edges but where it counts (valve seats, square guides) they're well done

today, remove such silly stuff as steering
first remove power part
[Only registered and activated users can see links. Click Here To Register...]

it's in good shape (painted pretty)
[Only registered and activated users can see links. Click Here To Register...]

move the tie rods to the manual hole
[Only registered and activated users can see links. Click Here To Register...]

move the Buick to the Fiat hole, the the Fiat to the Corvette hole, then the Corvette to the lift
[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

time to start cleaning it up
[Only registered and activated users can see links. Click Here To Register...]

all of these have issues - but between the all, I think I have one good one
[Only registered and activated users can see links. Click Here To Register...]

finish remove steering
[Only registered and activated users can see links. Click Here To Register...]

pretty part... wrong one.... again, this is a 48 spline 1" and a 30 spline 3/4.... which is exactly what I didn't order
[Only registered and activated users can see links. Click Here To Register...]

I did, however, get medieval getting it apart
[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

so I'm kind of stopped there for a moment - no worries, there is much I can do.... what? well, you'll just have to tune in next time on As the Corvette Flops.
Reply With Quote
  #103  
Old 10-16-2017, 10:05 PM
SuperBuickGuy's Avatar
SuperBuickGuy SuperBuickGuy is offline
United States | Addict
 
Join Date: Jul 2012
Location: Seattle, WA
Posts: 1,861
My Photos: (0)
Default

so knuckle-dragging suspension (meaning, mostly race car - like Greenwood) or bleeding edge? I'm hesitating a bit because I don't know which way I want to go.... with the wide fenders, I could bolt most of a C7 Corvette's suspension under this .... or I could do incremental changes.... rack and pinion in the front? or simply update the geometry? In the rear... I suspect I'm going to have to replace everything and it doesn't cost more to simply go with the greenwood bits I already have....

I really think I could make what I have really perform with custom-fab'd a-arms and little more (widen the track and then get more castor with more camber gain as well). I think I need to some envisioning work - but that's my current thought and figured I'd put it up here to see what the pros think. To my thought there would be a best-geometry for a specific tire size that I would fabricate arms to meet that criteria but I'm not a pro so I've no idea where even to look....

and for the record - I could take a pile of money to someone to do it, but I'd rather spend more, work harder, make the mistakes and learn then simply spend money.
Reply With Quote
  #104  
Old 10-16-2017, 11:05 PM
mrvette's Avatar
mrvette mrvette is offline
United States | Phantom of the Opera
 
Join Date: Mar 2008
Location: NE Florida
Posts: 15,306
My Photos: (3)
Default

OLD hotrodder here, been through a few over the 60 year span.....IMO...I"d do what I did again, given to do it over again....

I did my own rack install with TT's help and a fellow in Europe who did the first shark/rack install name of Yoshi?? I think that was his handle anyway, and so figgered out the rack came from a '89 Grand AM, CTO rack, got my own adapter block from local machine shop, and measured/cut up steel for my own mounts using stock rubber parts for the rack, and stock clamps....

I have a cross support between A arms....and did my wheels on a budget have '89 vette wheels 17x9.5 on it with VBP 2.5" thick adapters....NOT SPACERS....so it's ten nutz to get to the rotor....I limit the radius in front so the 255/50/17's do not hit the frame/sway bar....

In back I moved the ebrake mount to behind the rotor, so wheels/tires clear just fine.....on this you have to know my '72 has flares and mud flap style change....it was an old show car.....

no change to the rear, except small sway bar, front sway is the smaller one....360 VBP plastic rear spring to save me neck on the rough roads around here, much less the stupid 'rumble strips' on a main drag in/out of here.....

stock arms and perf align by a decent shop.....

it's only a 4 bolt main 350 block 30 cut....L98 heads, highly modified LT1 induction like a '94 vette, BUT retained the HEI in back nice and dry, the way God intended......built my own 200 4r auto over a couple daze some years ago, HAD a 700 in there, but the HUGE drop from 3 to one, down th 1.8 was too much in traffic...obviously both were done with Trans Go kits....and top quality parts from a local shop....upgrade converter clutch material too....can't remember what, though...Teflon??

Billy Stein sports on all 4 corners, 460 VBP coils in front....
Hurst chrome shifter bar, with 8 ball on top....just not cool unless you have a 8 ball on your shifter.....interior is totally not stock, call it black and tan.....

the windshield was totally resealed with RTV when I got the car....no rust possible now, totall filled everything....electric wiper door.....

being too tall, and arthritic as hell....I moved the firewall forward about 3" along the bottom and up to column height, and glassed it in, dropped the rear of the seat about 2" also old stock '72 foam....still comfy.....a late shark TT wheel/column...spaced 3/4 inch off the firewall....

this is just a short form note about all the mods...Hydro boost brakes, serp drive- '88-91 vette so later compressor, not some super heavy boat anchor....



I have later/better pix of the car today, on corvetteforum.com under mrvette handle......I need change post pix here too...the link at bottom is not valid anymore.....
__________________
"Hell, there are no rules here ... we're trying to accomplish something." Thomas Edison
I have a little list, let ALL of them be MIST......

Last edited by mrvette : 10-16-2017 at 11:10 PM.
Reply With Quote
  #105  
Old Yesterday, 05:10 PM
SuperBuickGuy's Avatar
SuperBuickGuy SuperBuickGuy is offline
United States | Addict
 
Join Date: Jul 2012
Location: Seattle, WA
Posts: 1,861
My Photos: (0)
Default

I've always admired your car. It gives me good ideas.
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 02:05 AM.
 


Design by: vBulletin Skins Zone
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.