Guldstrand rear toe adjusters - Page 3

rtj · #21 03-10-2018, 12:14 PM

Quote:

Originally Posted by redvetracr

I have pics of an actual Guldstrand kit with dimensions but the pics which are not that big are too large for VM, if someone wants to send an e-mail I will try and FWD them for posting...

Probably should be added to the tech section. I tried image hosting on Flickr (yahoo) but so far can’t get links with my iPhone.

BBShark · #22 03-10-2018, 05:47 PM

Got the pics from Howard and reduced them. What are people using for image hosting?

rtj · #23 03-10-2018, 08:31 PM

Quote:

Originally Posted by BBShark

Got the pics from Howard and reduced them. What are people using for image hosting?

If you already have a yahoo account, try Flickr. Right now it isn’t working very well with iPhone as I can get links, but not embedded or hot links. but, it should with a laptop or desktop.

BBShark · #24 03-10-2018, 08:35 PM

Finally! I found PostImage seems to work well. Photobucket can suck one.

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

COLE SWEAT · #25 03-12-2018, 07:17 AM

Thanks, this does not show the part that is welded to the frame

rtj · #26 03-13-2018, 03:28 PM

Quote:

Originally Posted by COLE SWEAT

Thanks, this does not show the part that is welded to the frame

I’m pretty sure it does.

redvetracr · #27 03-14-2018, 10:28 PM

Quote:

Originally Posted by COLE SWEAT

Thanks, this does not show the part that is welded to the frame

bottom pic LH lower, bottom pic RH center part. basically it`s a 7/8 nut with half the hex turned down