Go Back   VetteMOD.com > VetteMOD General Discussion > Projects

Reply
 
Thread Tools
  #601  
Old 04-23-2019, 04:35 AM
SuperBuickGuy's Avatar
SuperBuickGuy SuperBuickGuy is offline
United States | Addict
 
Join Date: Jul 2012
Location: Seattle, WA
Posts: 2,222
My Photos: (0)
Default

Hydraboost



edited
cut on the line


bright side is the plate fits, down side is the hole is too high

by an inch


unthread brake pivot


verify thread pitch


cut and threadedited




verify distance

I've had this Corvette style MC forever, it has the right internals, but the thread pitch is completely wrong for anything I've had before... more likely it will continue to be a test part... but it's nice to have one to check before I buy.

other end, using the right master cylinder


not the right one

Reply With Quote
  #602  
Old 04-23-2019, 04:48 PM
Red77 Red77 is offline
United States | Addict
 
Join Date: Jul 2012
Posts: 107
My Photos: (0)
Default

Where (which vehicle) did your Hydraboost come from? I'm thinking I need the same thing for low vacuum and valve cover clearance issues. There are several vehicles to choose to rob one from and new ones aren't too bad at Rock Auto. Just want to get an easy one to swap in. Looks like you've got it covered. :-)
Reply With Quote
  #603  
Old Yesterday, 04:43 AM
SuperBuickGuy's Avatar
SuperBuickGuy SuperBuickGuy is offline
United States | Addict
 
Join Date: Jul 2012
Location: Seattle, WA
Posts: 2,222
My Photos: (0)
Default

the secret to hydroboost is there are 2 sizes - this is the smaller one and IIRC it's from either an Astro van or something similar... it's chief attractor was it was cheap (think about $100 on Amazon)....
Reply With Quote
  #604  
Old Yesterday, 04:43 AM
SuperBuickGuy's Avatar
SuperBuickGuy SuperBuickGuy is offline
United States | Addict
 
Join Date: Jul 2012
Location: Seattle, WA
Posts: 2,222
My Photos: (0)
Default

a break from Corvette brakes

a box


with bits


my table arrived!!!!


must assemble NOW




this thing is really well designed - and goes together pretty easily if you watch the videos
2 hours of unpacking and assembly and here it is


I still don't know what computer I'm going to use or even which plasma... I'm sure I'll try the TD but that hunk of utter crap will be lucky if I don't throw it through a shop window... and there aren't windows in the shop... backing down to more sane, its problem is the gun and it's either the machining in the torch or the trigger - I really doubt it's the trigger, but this table allows me to bypass the switch and it'll quickly tell me what's up.edited I'll detail my troubles with Thermal Dynamics later, but for now, really impressed with this table
Reply With Quote
  #605  
Old Yesterday, 02:09 PM
SRountree's Avatar
SRountree SRountree is offline
United States | Addict
 
Join Date: Apr 2015
Location: Cincinnati - Middletown OH
Posts: 217
My Photos: (104)
Default

I am assuming that's a computer plasma cutting table? If so what kind is it? Looks like a decent table.
__________________
Steve Rountree
513.505.4494
Middletown OH


If you can change your thoughts,...
You can change your world...
Reply With Quote
  #606  
Old Yesterday, 08:06 PM
SuperBuickGuy's Avatar
SuperBuickGuy SuperBuickGuy is offline
United States | Addict
 
Join Date: Jul 2012
Location: Seattle, WA
Posts: 2,222
My Photos: (0)
Default

Quote:
Originally Posted by SRountree View Post
I am assuming that's a computer plasma cutting table? If so what kind is it? Looks like a decent table.
[Only registered and activated users can see links. Click Here To Register...]
Reply With Quote
  #607  
Old Today, 04:08 AM
SuperBuickGuy's Avatar
SuperBuickGuy SuperBuickGuy is offline
United States | Addict
 
Join Date: Jul 2012
Location: Seattle, WA
Posts: 2,222
My Photos: (0)
Default

assembled
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:25 AM.
 


Design by: vBulletin Skins Zone
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.