Some interesting metal working tools

[BBShark]

I'm thinking about getting one of those. I have a horizontal cutoff saw for cutting sheet steel by tilting the blade up 90 degrees. It is stored under a bench and I have not used it for years because I'm too lazy.

[rtj]

I like the swag design. Pretty simple, I need a guide slot.

The HF unit is pretty solid, with a coupon it was pretty cheap. All I need is to cut thin alum tube.

[rtj]

[Only registered and activated users can see links. Click Here To Register...]

Another reasonable option.

Didn’t realize there were so many.

[CollegeKevin]

Originally Posted by rtj

I like the swag design. Pretty simple, I need a guide slot.

The HF unit is pretty solid, with a coupon it was pretty cheap. All I need is to cut thin alum tube.

Perfect for that. I've been using cut off wheels, jig saw, sawzall, and hacksaw for a long time. I'm working out of a storage unit so I had to pass up on many good used deals for a proper bandsaw. My buddy had one of these saws so I started researching, that's where I found swag. USA made and for that price, I couldn't pass it up. Got some good blades and the things a champ at what it does.

[rtj]

Thanks, I ordered the version 3. I found a couple of the angle guides, so I’ll be good to go. Free shipping for our state!

Here’s one more vid. For 120$ I just isn’t worth making myself.

[Only registered and activated users can see links. Click Here To Register...]

[CollegeKevin]

Originally Posted by rtj

Thanks, I ordered the version 3. I found a couple of the angle guides, so I’ll be good to go. Free shipping for our state!

Here’s one more vid. For 120$ I just isn’t worth making myself.

[Only registered and activated users can see links. Click Here To Register...]

Exactly. USA made and cheap. I would spent more time gathering materials and probably a day or 2 building plus probably spending 3/4 the cost buying the materials. Did you go with Swag?

[rtj]

Originally Posted by CollegeKevin

Exactly. USA made and cheap. I would spent more time gathering materials and probably a day or 2 building plus probably spending 3/4 the cost buying the materials. Did you go with Swag?

Yes, version 3. Uncoated, I’ll rattle can it. Thanks for the tip. Most others don’t have a guide.

[rtj]

Shop tools, not metal working. I bought their lawn tractor tire changer and have used it a lot.

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]