TPI initial timing

BangkokDean

Well-known member
Joined
Mar 25, 2008
Messages
3,343
Location
Bangkok
I am still working on the TPI for the L98 motor in my 56. My question today is setting up the dizzy as there is no v/advance what do you set the initial timing at? I assume the controller will do the rest.
 
disconnect the est bypass connector (wire is tan w/ black tracer) and set it to 6 degrees. reconnect wire and haul ass
 
disconnect the est bypass connector (wire is tan w/ black tracer) and set it to 6 degrees. reconnect wire and haul ass

tumblr_lggyaazGEA1qzr2kio1_500.gif
 
Top