Resources
Categories
Top resources
-
-
Data Acquisition by Frank WhitonThis document was written by a GM engineer in 2011. Very good analysis and layout of a data acquisi
- phantomjock
- Updated:
-
Data Acquisition by Frank WhitonThis document was written by a GM engineer in 2011. Very good analysis and layout of a data acquisi
- phantomjock
- Updated:
-
Data Acquisition Decision MatrixThis is a spreadsheet I made to help choose which system to buy. Hope it proves useful to others
- phantomjock
- Updated:
-
Optimal Design and Fabrication of Exhaust Muffler.Optimal Design and Fabrication of Exhaust Muffler
- BBShark
- Updated:
Most resources
-
43Twin_Turbo
-
17phantomjock
-
17BBShark
Modified Jeep Box
2008-05-01
Jeep box modified to bolt on to a C2 or C3 Corvette maintaining steering and pitman shafts in the sa
GM Block Dimensions
2008-05-14
All bolt hole centerline to centerline, crankshaft to deck heights, head bolt hole patterns, bellhou
75 76 Tach schematic
2008-05-21
Tachometer schematic and board layout for 75-?? Also included is a picture of two board configurati
L88 style headlamp bucket
2008-05-25
This is a template for an L88 style bucket. No mounting holes, they will need to be drilled as will
C4 Heater Fan Spacer for C3 Scale Drawing
2008-08-05
This is a scale drawing that you should be able to print to scale to use as a template for using a C
C4 Fan in a C3 Spacer Dimensions
2008-08-05
This is a dimensioned drawing of the spacer needed to install a C4 fan in a C3.
Jeep Steering Adapter Plates
2008-08-11
This is a .pdf drawing of the adapter plates for use if you don't want to laser cut them. The thr
Jeep Steering Adapter Plates (for laser cut)
2008-08-11
This is a .dxf drawing of the adapter plates for use if you want to laser cut them. This is the inf
Rotor Cross Drilling Template
2008-11-04
Drilling template for C2 & C3 rotors
1970 Wiring Diagram
2008-12-10
Complete Wiring Diagram for 1970 Corvette
Spindle Setup Tool
2009-02-20
Solidworks 2007 Spindle Setup Tool 3D Model.
Stroker 427 6 Link
2009-03-09
These are the cutting patterns to build your own Stroker-427 Design 6 link rear suspension.
These
C4 Brake Caliper Pictorial
2009-04-04
This is a pictorial of all the brake calipers that were used on the C4
Left rear brake caliper inner half
2009-04-07
Lefthand rear brake caliper half, inner side.
Left rear brake caliper outer half
2009-04-07
Lefthand rear brake caliper outer half.