Search results for query: *

The clutch just started slipping so I need your help on a new clutch. I have Chris McSpeed's (aka Killer) 69 vette and it has an awesome 454 bored 60 over edelbrock fuel injected 540HP engine with the stock lightweight 14lbs L88 flywheel. He said he went through like 3 different clutches/brands...

When the headlights are up...they are not 100% fixed and the bucket assembly has a very slight wiggle that flickers the headlights while driving down the road. I looked for some type of stop/adjustment but i could not find anything when they are in the up position...I found the adjustment nut...

1969 Corvette Convertible #’s Matching L46 350/350HP Rebuilt 27K miles ago to 9:1 compression by previous owner in 1990 Recently dyno’d @ 260rwhp 5/08 6 Speed Richmond Transmission With 3.70 Rear Gears (2,300rpms @ 70mph) $5,000 7/06 18” Bonspeed Huntington Wheels $3,500 8/07 (Rear 18x10...

I have done some research and it seems as if the general rule of thumb is about 85% of 14.7:1 => 12.5 AF ratio results in maximum HP. If all goes well tonight and the guy has time tomorrow I will be getting my carb tuned Friday as we switched to E10 gas recently and now I am getting some...

I am very new to dailing in the bellhousing using dowl pins. With the assistance of a couple of friends who are more knowledgable about this transmission stuff we will be doing a custom 6 speed swap using a QuickTime, Inc. Bellhousing. I called QuickTime and of course they say that because...

I got my compression check done and spoke with the mechanic this morning. The results were interesting and leads to me question if my engine was ever rebuilt with lower compression 9:1 vs. stock 11:1 L46. I have a 69 L46 that supposedly was rebuilt in 1991 with around 9:1 compression which was...

so what is the correct size for the front differential pinion yoke size?

I have developed a PITA clicking/popping noise in the rear passenger area. It only occurs when I change direction (foward, reverse) and clicks like 1 or 2 times. I can feel the click through the drive train to the stick shift. I have looked at everything under the car and all appears to be in...

Where can I buy a good dial indicator and exactly what type/kind do I need? I see some say "1" movement" but have no idea what that means.

During my research for a T56 swap somebody mentioned that using BB motor mounts on my small block will slightly lower the engine improving the driveline angle. Anybody ever do this?

It is not easy for me to get these measurements while my transmission is installed and I live in a condo so maybe somebody with easy access to a partly assembeled car could help... I need the following measurements: 1. Thickness of stock SBC bell housing (6.4"?) 2. From the Muncie front...