 |
Forum Jump | Register | FAQ | Members List | Calendar | Mark Forums Read |  |
|
|
|
|
#672
08-15-2019, 04:27 AM
|
||||
|
||||
time to shim the body
 the more I look at this, the more I think the shims are more of a problem then a solution.edited When I put the body back on the frame I put the stock shims back in place....edited 
|
|
#673
08-24-2019, 04:45 AM
|
||||
|
||||
|
last thing I did today was pick up some 2013 grand sport tires/wheels...edited
 I need to get different pads (without the weights - or cut them off)  only my camera could make a 335/30 19 tire look narrow..  this is sitting on the ground so I could drop the car down an inch or so [Only registered and activated users can see links. Click Here To Register...]
|
|
#674
08-25-2019, 06:04 AM
|
||||
|
||||
|
These ears - are the problem.edited I think they're a GM demanded anti-squeal or anti-chatter device.edited All replacements I've seen do not have them on it
  chop em off  and voila 18s fit  fat bottom vettes make the rocking world go round   and it clears.. no need to move the flares 
|
|
#675
08-30-2019, 10:32 PM
|
||||
|
||||
|
shuffled cars, figured I'd snap a shot of it outside
 my goal this weekend is do burnouts with it.... lots on the list, but it's doable....
|
|
#677
09-01-2019, 09:49 PM
|
||||
|
||||
|
Any local Autocross you can go raise some eyes at? Videos and sound please!!!
Cheers - Jim BTW - no progress for me -- been stuck in the bilge pulling 30 years of accumulated wire and crap to prep the sailboat for sale. Then prep and paint the decks. AGRGGH me Matey - keep on course!! ! 
__________________
Rebuilder's Zen Saying: One thought leads to another. If these thoughts link into a chain we become bound to the project. This bondage is subtle and remains until we complete the tasks -- or, STOP Thinking! [Only registered and activated users can see links. Click Here To Register...]
|
|
#678
09-02-2019, 04:49 AM
|
||||
|
||||
|
didn't get a lot done on this today - but got started with a cooling mod
   see the problem?   I need to close this gap up a bit, but ultimately I'll simply move the intake up and put a shade on the top so it draws first from the bottom...  it does look good 
|
|
#679
09-03-2019, 02:16 AM
|
||||
|
||||
|
empty box is good
 yeah not so much.... the list was right, just didn't have enough sub-parts  the biggest one....edited 
|
|
#680
09-04-2019, 12:48 AM
|
||||
|
||||
|
Not a rant - simply wondering if anyone else is dealing with this.
I have a Miller Elite helmet I bought early 2014. It has worked as expected since new, but recently the dimming function seems to be possessed. My first thought was battery, and I replaced it, that helped but it still either doesn't dim or dims then doesn't come back to see-through. Replaced the battery again, replaced the protective lens, dusted (gently) the lens and sensors... no joy. Anyone else dealing with this? I've reached out to Miller but probably won't hear back for at least a couple days.... are sensors a wear item? I would hope that replacing $400 helmets every 5 years is not the answer.... of course, if it is.... what do you like? this helmet is starting to wear on the pivots so I won't be terribly upset to give it a full update (I like that it doesn't fog easily).
|
 |
| Thread Tools | |
|
|
 |
 |
|
Addict
