big2bird
Charter Member, Founder Bird-Run, Cruise-In Bird-R
Jim,
If the Saginaw box were to be reproduced in aluminum, would the case be strong enough?
If the Saginaw box were to be reproduced in aluminum, would the case be strong enough?
Aren't the 71 to 82 c3 boxes aluminum?
Okay I have an Aluminum Fetish, Bird posted this on my behalf. The original Grand Sport had an aluminum box (Along with an alu. diff.) Since a production C2/C3 is heaver, I am not sure if a direct casting copy of the iron one would work, a beefed up copy or if it would need to be out of billet. Got to ask the question. Thanks, George
Jim,
If the Saginaw box were to be reproduced in aluminum, would the case be strong enough?
[/QUOTE]Now Someone needs to make the other half of the case in ALU. TOM?
Coincidentally, I just found this at Duntov Motors.
Aluminum Diff Cover
Original GM wooden plug? Sorry guys but I was there when this "plug" was made. It wasn't wood and it wasn't original. But it did have wood glued to it.
Mike
Now Someone needs to make the other half of the case in ALU. TOM?
Coincidentally, I just found this at Duntov Motors.
Aluminum Diff Cover