Hi
Want to build a 383 to replace my tired 327.
Since this is for the street with decent performance, running pump gas, I have been looking at Scat’s stroker kit.
However, the choice is either a 9.8 or 11.0 SCR with my 64CC Trickflow alu heads, where both seems to far from ideal. With piston volume of either 18CC or 5CC.
I have not found a proper DCR calculator (That I can use), but expect to be somewhere in between these two.
So I want to put a kit together myself, but have to decide on proper piston volume.
Anyone here with good experience?
Camshaft will be Crane 119701 with intake 0.05 closing at 38.0 ABDC
Thanks
Lars
Want to build a 383 to replace my tired 327.
Since this is for the street with decent performance, running pump gas, I have been looking at Scat’s stroker kit.
However, the choice is either a 9.8 or 11.0 SCR with my 64CC Trickflow alu heads, where both seems to far from ideal. With piston volume of either 18CC or 5CC.
I have not found a proper DCR calculator (That I can use), but expect to be somewhere in between these two.
So I want to put a kit together myself, but have to decide on proper piston volume.
Anyone here with good experience?
Camshaft will be Crane 119701 with intake 0.05 closing at 38.0 ABDC
Thanks
Lars