BangkokDean
Well-known member
I was just checking the web on adjusting the TV cable from the 700R4 trans and the TPI linkage and was reading the Bowtie over drive site and it says that the spring in the valve body must be changed? Is this true?
"If you have a used transmission or one rebuilt by another company, you will need to install our custom length spring into the valve body. This is not an optional step. If you fail to install our spring you will try to run this transmission in an SSS (Short Spring Syndrome) condition which can quickly prove fatal to your transmissions frictions. This is a very simple easy installation but MUST be done!"
TV Made Ez - Spring replacement and shim installation guide sheet
http://www.tvmadeez.com/spring_install/700r4.php
Also they say the TV linkage bracket must be changed?
http://www.tvmadeez.com/tpi/
"If you have a used transmission or one rebuilt by another company, you will need to install our custom length spring into the valve body. This is not an optional step. If you fail to install our spring you will try to run this transmission in an SSS (Short Spring Syndrome) condition which can quickly prove fatal to your transmissions frictions. This is a very simple easy installation but MUST be done!"
TV Made Ez - Spring replacement and shim installation guide sheet
http://www.tvmadeez.com/spring_install/700r4.php
Also they say the TV linkage bracket must be changed?
http://www.tvmadeez.com/tpi/