69427
The Artist formerly known as Turbo84
I like the looks of the C5/C6 front suspension cradle that the lower A-arms bolt to. I assume the odds are very slim, but did Chevrolet keep the same spacing between the A-arm mounts (ie: would C4 A-arms fit that cradle)?
Or, if using a C5 cradle and lower A-arms, would the balljoints fit C4 knuckles (to retain the rest of the C4 suspension and brakes)?
Just trying to see if it's feasible (weightwise) to try to install an aluminum C5/C6 cradle in place of my steel crossmember. I don't have a weight for these cradles, but I'm running out of weight reduction ideas elsewhere on the car.
thanks,
Mike
Or, if using a C5 cradle and lower A-arms, would the balljoints fit C4 knuckles (to retain the rest of the C4 suspension and brakes)?
Just trying to see if it's feasible (weightwise) to try to install an aluminum C5/C6 cradle in place of my steel crossmember. I don't have a weight for these cradles, but I'm running out of weight reduction ideas elsewhere on the car.
thanks,
Mike