donboywalnut
Member
- Joined
- Jul 7, 2011
- Messages
- 8
ordered 1 new rear axle, 3/4nf and new nut, got to checking my good axle and 3/4nf bolt does not fit, i have a good 3/4nut but it will not start, the original nut threads right on so i put a 3/4 nf tap beside the axle threads and compare by eyeball and the thread is finer on the axle, my car is a 79,could i have an axle w/metric threads? has anyone ever ran into this when replacing rear wheel bearings? if so i'll need 2 different install tools?