DeeVeeEight
Fast Pedalphile
Are we going to do the Christmas giveaway this year? I have a few items I could part with.
Best wishes to all!
:drink:
Best wishes to all!
:drink:
Christmas Giveaway
- Thread starter DeeVeeEight
- Start date
It was sort of a dud last year. But, you started it, let's do it!
Here are the rules (from the late great Big2bird):
Okay folks. Tis that time of the year once again. The annual Vettemod Christmas thread giftaway.
Here are the rules:
Place one item or more up for grabs. Pictures are good, but not necessary.
FIRST one to POST that they want it, gets it. PM's /e-mails do NOT count.
Shipping to be paid for by recipient, (in case it's a big block shipped to Netherlands), but may CERTAINLY be gifted too if you wish.
You do NOT need to give a gift to recieve one, although it IS encouraged.
Here are the rules (from the late great Big2bird):
Okay folks. Tis that time of the year once again. The annual Vettemod Christmas thread giftaway.
Here are the rules:
Place one item or more up for grabs. Pictures are good, but not necessary.
FIRST one to POST that they want it, gets it. PM's /e-mails do NOT count.
Shipping to be paid for by recipient, (in case it's a big block shipped to Netherlands), but may CERTAINLY be gifted too if you wish.
You do NOT need to give a gift to recieve one, although it IS encouraged.
DeeVeeEight
Fast Pedalphile
I have a set of 7 mm. Accel wires for a non-HEI distributor, new in the box. These are old school points type wires. I also have a used Moroso aluminum carburetor spacer, it looks to be 1" tall, I believe you can see the numbers in the 2nd picture.
Shipping is from Haddonfield, NJ 08033
Nope! you can't see the numbers. They are Moroso 64940
Shipping is from Haddonfield, NJ 08033
Nope! you can't see the numbers. They are Moroso 64940
TimAT
Addict, Cruise-In Bird-Run 1 Veteran
I could use both the wires and the spacer (now that I have enough hood!)
I have a pair of 78-82 doors. The frames have some light surface rust, the fiberglass skin on both are in good shape. The locks and window tracks are mostly not there. Pretty bare. Sorry I don't have any pictures of them.
I have a pair of 78-82 doors. The frames have some light surface rust, the fiberglass skin on both are in good shape. The locks and window tracks are mostly not there. Pretty bare. Sorry I don't have any pictures of them.
SuperBuickGuy
Well-known member
Composite spring, soft.
A composite spring, soft, unknown manufacturer. came with the purchase of my 'vette. call it 10 lbs from 98052
note - it is removed from the car... and I even have a good box to send it away in....
A composite spring, soft, unknown manufacturer. came with the purchase of my 'vette. call it 10 lbs from 98052
note - it is removed from the car... and I even have a good box to send it away in....
Last edited:
denpo
Carburated Nihilist
I take it!Composite spring, soft.
A composite spring, soft, unknown manufacturer. came with the purchase of my 'vette. call it 10 lbs from 98052
note - it is removed from the car... and I even have a good box to send it away in....
denpo
Carburated Nihilist
Ok, I have a crapload of stuff to get rid of from my '76, since I won't give everything away for free, let's say I'll let 3 item go for free.
Still 2 item to go
What I have :
Auto pedal assembly (x2)
Accelerator pedal
'76 catalytic heat shield
stock front spring
stock water pump pulley
stock crankshaft pulley
stock ps pulley
pair of '76 fibeglass t-tops (taken by DV8)
pair of door sill (bad shape)
pair of rocker panel (chrome partially sanded off)
Front bumper lower panel
Front urethane bumper x2
Rear urethane bumper
Front bumper assembly
Foot headlight switch.
Passenger side fender bracket (rusted but still useable)
Steering valve and cylinder (to rebuild)
Most are heavy stuff, so shipping is on you. If you're in a hurry shipping is from H2S 2V2 QC, if you're not, shipping is from 12959 NY.
Still 2 item to go
What I have :
Auto pedal assembly (x2)
Accelerator pedal
'76 catalytic heat shield
stock front spring
stock water pump pulley
stock crankshaft pulley
stock ps pulley
pair of '76 fibeglass t-tops (taken by DV8)
pair of door sill (bad shape)
pair of rocker panel (chrome partially sanded off)
Front bumper lower panel
Front urethane bumper x2
Rear urethane bumper
Front bumper assembly
Foot headlight switch.
Passenger side fender bracket (rusted but still useable)
Steering valve and cylinder (to rebuild)
Most are heavy stuff, so shipping is on you. If you're in a hurry shipping is from H2S 2V2 QC, if you're not, shipping is from 12959 NY.
Last edited:
phantomjock
Well-known member
I wanna Play too..
Hers's book for Drag racer Chassis guys. Gifted to 73 Mike! Merry Christmas!
I found it useful while considering using Motor Plates, some basic design and Fabrication ideas for wishbones, chassis etc.
Now it can be your stocking stuffer! Make your claim - and pm me an address. Shipping will be USPS Flat rate.
(Can't say for international bidders)
Cheers - Jim
Hers's book for Drag racer Chassis guys. Gifted to 73 Mike! Merry Christmas!
I found it useful while considering using Motor Plates, some basic design and Fabrication ideas for wishbones, chassis etc.
Now it can be your stocking stuffer! Make your claim - and pm me an address. Shipping will be USPS Flat rate.
(Can't say for international bidders)
Cheers - Jim
Last edited:
GTR1999
Gearhead
denpo
Carburated Nihilist
DeeVeeEight
Fast Pedalphile
I am interested in the T-tops and am in no hurry. :thumbs:
DeeVeeEight
Fast Pedalphile
denpo
Carburated Nihilist
They're yours, PM me your address. I'll probably wait for next year to ship them, pre-Xmass shipping is asking for troubles.
MYBAD79
Moderator
Bare doors ? I'll take them..... no rush though, don't have to have them tomorrow...... need to look into shipping.....
73 Mike
I'll drive it someday
Hers's book for Drag racer Chassis guys.
I found it useful while considering using Motor Plates, some basic design and Fabrication ideas for wishbones, chassis etc.
Now it can be your stocking stuffer! Make your claim - and pm me an address. Shipping will be USPS Flat rate.
(Can't say for international bidders)
Cheers - Jim
Jim,
I'd love to have the book. Happy to pay shipping.
Among other things, I have a couple of rebuildable vacuum relays. I'll look around and see what else I can put under the tree.
clutchdust
Millionaire Playboy
Damn, step too late. Not sure '76 tops would work anyway.
denpo
Carburated Nihilist
It would work with a mod you wouldn't want to do.
phantomjock
Well-known member
Mike its yours.
PM me you snail mail address.
I'll get it out this week.
Cheers - Jim
PM me you snail mail address.
I'll get it out this week.
Cheers - Jim
TimAT
Addict, Cruise-In Bird-Run 1 Veteran
You got them..
Good thing you don't need them in a hurry- I'm in northern Michigan and won't be home until after the first of the year.
mrvette
Phantom of the Opera
Xmas outta town?? better hope your pay is enough for THAT shit.....
:bestwishes::bestwishes:
