Latest activity

thats what we call BINGO and added the welsh plug with some gasket sealant around it and badda bing badda boom and...

and the pressing part a 20 ton press, I used an impact socket to get the depth i needed. then it was cleaning it up...

next is pulling welch plug i drilled it off center but i should have drilled it in the middle, off center my screw slide hammer didnt...

pulling my sons axle motivated me for todays work, so if we can pull that big ass F250 axle out how hard could it be to R/R my rear...

Thanks. I'll give that a try. I'm looking for a late 90's 2dr Tahoe that isn't a rustbucket. I called about one today that is in...

If you have a vin most states let you check the title. For free. You get some info from that. I always used carfax. The picture below...

it would make one question one's sanity, training, and life choices... apple didn't fall far with this one?

yes and yes, you know you are in deep shit when the cold beers out of the refrigerator are warmer then the ambient temp.

I am looking for a 90's Chevy truck that has been in the south or south west for the last 30 years. I am in Ohio, and will have to...

Yeah, pretty much what I was thinking. Once rolled you still have some width adjustment. A lot of machine for 200. Ad still up. FB...

This sort of looks like the handle may spread the rollers apart? Also, there is a weird gap on the right side mandrel. You cant pivot...

My guess is you start with a flat sheet and small rollers on the bottom, then start rolling.

Saw this for sale ($200), says it was used to make oval SS mufflers.

You might recall on the Seinfeld show, there was a Skip Barber Motorsports sticker (not magnet) on the freezer. Jerry "got" that when...