I like this setup

[BangkokDean]

What do you think?

 

[phantomjock]

That is a real clever approach.
Milling an interface plate that has the mounting points for both Upper and Lower Control Arms. Saw that on another forum and it caught my eye there too.

It is not too clear how they've mounted the front of the LCA (its an H Arm) - there must be a second similar bracket off the front flange or chassis stub.

Sure looks cool.


Cheers - Jim

 

[phantomjock]

Ahh - you piqued my curiosity

So, I went back and did some digging:







Nice.

Cheers - Jim

 

[Ralphy]

Ford housing with an adapted Jag dummy quick change cover. I liked it also, just wish the QC housing was real.

Ralphy

 

[BangkokDean]

Those half shafts look really nice, I wonder what they are?

 

[BBShark]

Ford housing with an adapted Jag dummy quick change cover. I liked it also, just wish the QC housing was real.

Ralphy

I agree. Probably wasn't cheap either.

 

[Ralphy]

Those half shafts look really nice, I wonder what they are?

If I'm correct that's a T Bird IRS. Factory half shafts. The Jag cover polished goes for 600 clams at Speedway Motors. Also, it looks like he made the main housing mount.
http://www.speedwaymotors.com/Champ-Style-Quick-Change-Jag-Rear-Cover-Polished,38970.html





Ralphy