Long Overdue Progress! Rebuild Doors & Latch Mods 10/02/24

I actually did put the carpets in front of a space heater. But I don't know that it helped. No excuse for making the carpet behind the storage doors too short.

I'm doing the front carpets next. ACC glues a thick jute pad on the carpet. I found that removing that makes the fit better but still not great. I cut some pie slices in it to help it conform on the sides. Good thing half of the front carpet will be covered with seats!

Is ACC the only choice for carpets?
 
I've been considering your carpet problem - make the car faster is my suggested solution.... the only person who would see it is cops - and cops don't care about carpet length (well, at least none that I know care)....
 
Next is figuring out how to install 3 point seat belts in a convertible.
it seems like it would have to be just behind the seats so it didnt interfere with the covertible top

It will work, I think. Clearance with the top down is limited. The attachment of the belt loop might be a little contorted. I'll find that when I can put the seats in. That what started this. I was ready to put seats in and realized I needed to put carped and seat belts first. :crap:

I was lucky to find modern/aftermarket belt that would work with a horizontal (inertia locking) retractor.
 
Installed most of the carpet (except driver side). That's next. Installed the part of the shoulder belt that attaches under the seat and installed my first seat! I can now sit in the car and imagine I'm in a fully functional car.


45ffa271985279.jpg

45ffa2719a3e3c.jpg
 
I bought those seats about 10 years ago and they were in great condition as is. I was thinking of re-doing them but really couldn't justify the cost.

It's starting to look like a real car :beer:
 
Completed the carpet install and both seats. The car is now looking like a semi-functional car rather that a project. Amazing what seats will do.

46000277254f20.jpg
 
So going back to my (poorly done) carpet installation in the rear cargo area, I decided to conceal the 4" gap and the wrinkly wheel well carpets with a giant speaker box! Had to cover the back where the 4" gap was and the lift/hinge area. Here is the roughed out box.

460281113d50aa.jpg

Seat belt shoulder retractors done. Still need to figure out the shoulder strap loop design.

4602814789cafa.jpg
 
Looks nice, you’ll have a really stunning convertible soon.
 
I had not planned on anything special for the sound system. I have tried to keep myself on the path of getting this car on the road first. But this diversion was caused by the carpet installation. A functional car needs seats but carpet comes before seats and seat belts come before carpet.

I wanted modern seat belts with a shoulder strap and that took a few false starts before I got something that would work. Then the carpet installation went south because the ACC carpet was too short in the back and the pieces that go over the wheel wells were a mess. So that's were the speaker boxes came in. They will cover the badness of the carpet! The trick was making the box clear the stowed convertible top.

There are 2 10" subs and 6 1/2" speakers next to them. The fronts are 6 1/2" either mounted in the kick panels or the doors. Doors are the next thing to work out.
 
love the fix... apparently I give up 2 points not having a stereo in my C3... which I don't care about, except at least one track I plan on going to announces via FM radio....
 
looks great and thats going to sound great, it must take some big amp to drive all that, do you have that sourced yet?
 
I have all the stuff bought already. It's been a long time since I put a stereo in a car, at least 30 years ago. I was really surprised at how reasonable the cost was for speakers etc.

The head unit is a JVC with 4x50w output and a 600w sub amp. I'm not really looking for a thumping output that rattles the car. I'm just trying to move some air to get a decent sound in a convertible (with is difficult). And, cover up my lousy carpeting.
 
I was surprised at how much sound insulation they put in the doors of the C5.


i had to replace the mirror that got broken before i bought the car and they had insulation every where and every opening closed up on the door.
 
I've been working on the doors for a while now trying to figure out how to make them less aggravating. I have one year only 68 doors. 68 doors are one year only for good reason. The door handle is nothing more than a recessed finger perch to pull the door open (after you push in the top cover). 69 and up actually unlatches the door when you push the cover in. To unlatch the door you push the lock cylinder with your thumb.

Most if not all modern cars have electric actuators on the latches plus a bunch of other electric stuff. So that got me thinking why not put a switch on the handle that operates a solenoid and lock the door with a keyed switch?

Here is a picture of a mock up switch on the handle and the keyed "lock" switch.

4603526a51c6fa.jpg

Interesting about the C5 doors. I would like to do that with my doors so they don't sound tick a bucket of scrap metal when you close the door. I am gutting the doors to install new regulators and I expect it will be pretty easy to put some Dynamat in them.
 

Latest posts

Back
Top