Shock mounts

[odies dad]

Will a c3 vette rear shock mount work on a c4 rear end?
I need to be able to angle the rear shocks in a few degrees and by using the 90° c3 stud rather than the straight c4 one would allow me to do that.
Also would anyone happen to have a set laying around that they would be willing to part with or trade for some of my extra suspension parts?
I will have a set of 4 dog bones and the torque arm from an 88 that I will not be using.
Thanks

 

[redvetracr]

Will a c3 vette rear shock mount work on a c4 rear end?
I need to be able to angle the rear shocks in a few degrees and by using the 90° c3 stud rather than the straight c4 one would allow me to do that.
Also would anyone happen to have a set laying around that they would be willing to part with or trade for some of my extra suspension parts?
I will have a set of 4 dog bones and the torque arm from an 88 that I will not be using.
Thanks

I have a couple of extra C-3 lower shock mounts... $50+ $10 shipping

 

[odies dad]

Is the stud that attaches to the hub assembly the same as the c4?

 

[odies dad]

I don't think that the c3 mount will work. The mounting stud is a quite a bit longer than the c4 stud.
Anyone have a good idea of how to make the shock mount so I can angle the top of the shock inboard a bit?
I have seen a U bracket bolted on in place of the shock stud that will work.

 

[odies dad]

Got the new trailing arms put together and there is room for the shocks in their original position.
Things are looking pretty good so far.