New spreader bar mounts ready for powdercoat
- Thread starter 84rzv500r
- Start date
84rzv500r
Knows just enough to be dangerous!
phantomjock
Well-known member
Great idea - moved well forward into the "wonky" area (as described by my cage builder).
Cheers - Jim
Cheers - Jim
MYBAD79
Moderator
Hard to see on my phone (getting older doesn't improve my vision either).... These brackets move the bar foreward? How does it mount to the frame or shock tower?
I'm Still running the stock fan so there's not much room but whenever I get around to electric fans it might be worthwhile to copy your idea ...
I'm Still running the stock fan so there's not much room but whenever I get around to electric fans it might be worthwhile to copy your idea ...
84rzv500r
Knows just enough to be dangerous!
they mount to the cross shaft bolts just like every other one. i boxed them to carry the very light load back... they move the bar forward to be in exact line with the center of the forward upper a arm bushing.
I needed to replace my scrap pile version and found some cool bolts for stock cars that are weldments of chrome moly tubing...
I was also looking to move the bar forward to make room for the paxton supercharger drive belt... a future upgrade and a new custom 4 core radiator to replace the $169 2 core Jegs universal one i put in wharn I built the car...
the radiator is to keep it cool when I move 25 miles from the southern most point in the US later this year... :thumbs::thumbs:
mrvette
Phantom of the Opera
UMMM, Key West??? BTW, on your way south, drop off that old radiator, maybe it will fit my '72 I could use a larger one then I have now....
:drink:
MYBAD79
Moderator
Key largo? That's only a few hours from here .... Welcome new Floridian ???
84rzv500r
Knows just enough to be dangerous!
been in FLA for 6 years now... In Port St Lucie and Singer Island... headed for Big Pine Key
