Resources
Categories
Top resources
-
-
Data Acquisition by Frank WhitonThis document was written by a GM engineer in 2011. Very good analysis and layout of a data acquisi
- phantomjock
- Updated:
-
Data Acquisition by Frank WhitonThis document was written by a GM engineer in 2011. Very good analysis and layout of a data acquisi
- phantomjock
- Updated:
-
Data Acquisition Decision MatrixThis is a spreadsheet I made to help choose which system to buy. Hope it proves useful to others
- phantomjock
- Updated:
-
Optimal Design and Fabrication of Exhaust Muffler.Optimal Design and Fabrication of Exhaust Muffler
- BBShark
- Updated:
Trending resources
-
Resource icon
-
Resource icon
-
Resource icon
-
Resource icon
-
Resource icon
Most resources
-
43Twin_Turbo
-
17phantomjock
-
17BBShark
Resource statistics
- Categories
- 11
- Resources
- 126
- Downloads
- 470
- Disk usage
- 203.4 MB
Rear LH brake caliper assembly
2009-04-07
Rear brake caliper assembly for left hand side. Download first caliper models and piston model and k
Brake caliper piston
2009-04-07
Brake caliper piston. Modelled from rear caliper, but it should be the same in front too.
Left rear brake caliper outer half
2009-04-07
Lefthand rear brake caliper outer half.
Left rear brake caliper inner half
2009-04-07
Lefthand rear brake caliper half, inner side.
C4 Brake Caliper Pictorial
2009-04-04
This is a pictorial of all the brake calipers that were used on the C4
Stroker 427 6 Link
2009-03-09
These are the cutting patterns to build your own Stroker-427 Design 6 link rear suspension.
These
Spindle Setup Tool
2009-02-20
Solidworks 2007 Spindle Setup Tool 3D Model.
1970 Wiring Diagram
2008-12-10
Complete Wiring Diagram for 1970 Corvette
Rotor Cross Drilling Template
2008-11-04
Drilling template for C2 & C3 rotors
Jeep Steering Adapter Plates (for laser cut)
2008-08-11
This is a .dxf drawing of the adapter plates for use if you want to laser cut them. This is the inf
Jeep Steering Adapter Plates
2008-08-11
This is a .pdf drawing of the adapter plates for use if you don't want to laser cut them. The thr
C4 Fan in a C3 Spacer Dimensions
2008-08-05
This is a dimensioned drawing of the spacer needed to install a C4 fan in a C3.