ball joint taper

Twin_Turbo

Twin_Turbo

Der Maulwurf
Joined
Mar 5, 2008
Messages
7,575
What was the stock ball joint taper again? 1.5" per foot??

I've got a problem, my adjustable hemispherical upper ball joints have tapered studs that don't fit the spindle properly, they don't go in deep enough for me to get a cotter pin in there. So I'll need a proper reamer to enlarge the tapered hole in the spindle.

These are the adj. ball joints (and damn what a sore sight, rust EVERYWHERE :( )

24819ba2b7c0d3.jpg
 
Yeah they are 1.500tpf or sometimes called out as 7 degree taper.

I need one also also but they run about $100 for a good one. There are cheaper ones on Ebay (~$60) but they might only be good for cleaning out already existing holes. I don't know how suitable they would be for actual reaming.
 
Exactly, 100$ that's why I was hoping someone had one LOL The cheapenze crap is indeed only for cleaning up a hole, not for hogging one out.
 
Twin_Turbo said:
Exactly, 100$ that's why I was hoping someone had one LOL The cheapenze crap is indeed only for cleaning up a hole, not for hogging one out.
Click to expand...

Love to help you, the machine shop that did my inner tie rod adaptor block so to use stock tie rod ends....has ever damn reamer/taper bore in the book....

maybe I can ID a source???

:phone:
 
No, but I have several shipping addys in the US :) people I pester by filling up their homes & garages with stuff I buy LOL. I have parts lying all over the place, currently @ 4 different locations ranging from small stuff to wheels and complete race body panels :)

The Mc DOES accept Intl. Credit Cards tho! They love your money, just not shipping the stuff to you.
 
Twin_Turbo said:
No, but I have several shipping addys in the US :) people I pester by filling up their homes & garages with stuff I buy LOL. I have parts lying all over the place, currently @ 4 different locations ranging from small stuff to wheels and complete race body panels :)

The Mc DOES accept Intl. Credit Cards tho! They love your money, just not shipping the stuff to you.
Click to expand...


TFF....

:banghead::shocking:
 
Just did this a few weeks ago.

If you have access to a surface grinder and a collet fixture and or an angle fixture you can either dress the stone to your desired taper or just set the collect fixture to your taper and make a cutter out of an old end mill or even a decent drill bit.
End mills with more than 2 flutes work a little better than a drill bit to prevent chatter.

May be an option for you.
 
Twin_Turbo said:
No, but I have several shipping addys in the US :) people I pester by filling up their homes & garages with stuff I buy LOL. I have parts lying all over the place, currently @ 4 different locations ranging from small stuff to wheels and complete race body panels :)

The Mc DOES accept Intl. Credit Cards tho! They love your money, just not shipping the stuff to you.
Click to expand...

Lucky you .....:cry:
 
You must log in or register to reply here.

Latest posts

Back
Top