C3 Tilt front

[phantomjock]

Just added my tilt-Front saga - a few mo-bubbas there too:

http://www.vettemod.com/forum/showthread.php?t=5932

Cheers - Jim

 

[Miss Mako]

Do you still have this??? I'd like to buy.

 

[1Michel]

Yes, I did it. Have to look if I still have pics.

That front clip that howard has woald be nice if the headlight pockets were painted flat black and then a lexan panel fitted that matched the original curves.

It would also look good with projectors and make it look a bit like like this.

http://t3.gstatic.com/images?q=tbn:ANd9GcSc_Cgu7eMMdByKECyoAdBq5tpSXEe6VcRoDwB-KmY5I69ACnP4

 

[Miss Mako]

with this front end would i have to cut up the rear sec. of the factory clip to make up that area between the hood and the meeting up to the side lower fender(side gill) area ? Or is the side fenders made with that part on it and the top would be bonded into place up at the windshild-firewall area like the factory did it.OR is the two more parts that make up this clip making it a total of five parts to make a whole front clip? thanks...i'm tryinh to get an idea of what it would take to install this on my car if i go this route.

 

[Showme]

[/quote]



That is the first one I have seen with Avenger head lights!Would look cool with the lexan covers.:thumbs:
The Avenger was a Volkswagon based kitcar that resembled the ford GT 40.

 

[Showme]

with this front end would i have to cut up the rear sec. of the factory clip to make up that area between the hood and the meeting up to the side lower fender(side gill) area ? Or is the side fenders made with that part on it and the top would be bonded into place up at the windshild-firewall area like the factory did it.OR is the two more parts that make up this clip making it a total of five parts to make a whole front clip? thanks...i'm tryinh to get an idea of what it would take to install this on my car if i go this route.

You could go either way! It will require you to either cut the existing clip and leave it bonded at the rear, or remove it and cut it to fit,glass it together and let the whole thing tilt.It's a preference thing.:thumbs: Mine is cut similar to the Mako.

 

[redvetracr]

with this front end would i have to cut up the rear sec. of the factory clip to make up that area between the hood and the meeting up to the side lower fender(side gill) area ? Or is the side fenders made with that part on it and the top would be bonded into place up at the windshild-firewall area like the factory did it.OR is the two more parts that make up this clip making it a total of five parts to make a whole front clip? thanks...i'm tryinh to get an idea of what it would take to install this on my car if i go this route.

no, whatever pieces are required come with the red tilt front end....

 

[Showme]

no, whatever pieces are required come with the red tilt front end....[/QUOTE]

That's a sweet deal!:thumbs:

 

[Miss Mako]

DO you have any photo of the side fender sec.?I recall you did said they were of 69 side gills-vents look wize.....I will try and call tomarrow to find out bout the shipping we had talked about before....I'm really tring to make this deal happen...

 

[redvetracr]

I was off by a couple of years...

 

[bobs77vet]

this is pictures of my 69 tilt front