Corbeau FX1 Pro seat mounted

[CrossedFlags77]

I thought I would post some pictures of my new Corbeau FX1 Pro seat mounted in my '77. I was initially looking at the Forza seat but decided on the FX1 Pro because of the side mount setup. Being 6'4" it was important to me to have the seat as low as possible. I feel like I only lost 1/2" of headroom but if I take out the bottom cushions I gain over an inch. My ultimate goal will be to have enough headroom to wear a helmet with the t-tops on which will eventually lead to me lowering the floor. The only interference with the seat is slight contact with the shoulder support and the door panel. Here are the pictures.

Corbeau FX1 Pro

Custom adjustable seat mounts

 

[Twin_Turbo]

Those just barely fit in there. Looks like the vertical mounts have a lot of adjustment left to lower the seat?

 

[CrossedFlags77]

Those just barely fit in there. Looks like the vertical mounts have a lot of adjustment left to lower the seat?

The bottom of the seat has additional lower mounts and the rear ones are hitting the floor. :skeptic: I wish I could lower it more.

 

[MYBAD79]

These look great. It seems they fit like a glove :clap::clap:

I bolted my C6 seats directly to the floor, just some homemade brackets... mounted them as low as possible :thumbs:

 

[enkeivette]

These look great. It seems they fit like a glove :clap::clap:

I bolted my C6 seats directly to the floor, just some homemade brackets... mounted them as low as possible :thumbs:

:drink::drink:

 

[camber]

seats look great--Camber