Guldstrand rear toe adjusters

[rtj]

I have pics of an actual Guldstrand kit with dimensions but the pics which are not that big are too large for VM, if someone wants to send an e-mail I will try and FWD them for posting...

Probably should be added to the tech section. I tried image hosting on Flickr (yahoo) but so far can’t get links with my iPhone.

 

[BBShark]

Got the pics from Howard and reduced them. What are people using for image hosting?

 

[rtj]

Got the pics from Howard and reduced them. What are people using for image hosting?

If you already have a yahoo account, try Flickr. Right now it isn’t working very well with iPhone as I can get links, but not embedded or hot links. but, it should with a laptop or desktop.

 

[BBShark]

Finally! I found PostImage seems to work well. Photobucket can suck one.


EDIT: Looks like Post image sucks also. This is VM hosting:

 

[COLE SWEAT]

Thanks, this does not show the part that is welded to the frame

 

[rtj]

Thanks, this does not show the part that is welded to the frame

I’m pretty sure it does.

 

[redvetracr]

Thanks, this does not show the part that is welded to the frame

bottom pic LH lower, bottom pic RH center part. basically it`s a 7/8 nut with half the hex turned down

 

[COLE SWEAT]

How long is the adjuster bolt? The bolt with the hole drilled through it

 

[rtj]

How long is the adjuster bolt? The bolt with the hole drilled through it

It looks like 1.375. Top photo.

I like the fine thread bolts.