Painting trim.

[kwplot34]

I repainted the window trim and rocker panel last week,the window trim is supposed to be black but all the paint wore off years ago down to the chrome,and the rocker panels,well they just looked bad :smash:

What i did was take a scotch brite pad and scuffed up all the metal and removed the remaining black trim paint,cleaned the parts and then wiped them down with metal prep. I then applied 3 coats of self etching primer did a little sanding in between coats,and after a 3 hr drying time i applied 3 coats of SEM black trim paint.
I think they turned out great,all the little scratches got filled in and the paint has a very smooth finish to it.
Here are some pics,the pic of the rear window trim,it looks like there is chrome still showing all the way around on the edges in the pic :confused2: i don't know what thats all about

 

[Dirtbuster1]

Kevin,

Did you use the SEM Trim Black? Did you remove the rear moulding, or just tape everything up?

 

[kwplot34]

Kevin,

Did you use the SEM Trim Black? Did you remove the rear moulding, or just tape everything up?

I used the SEM trim black,and only pulled the rockers,taped off the windows.

 

[saudivette]

Looks good Kev. My sill trims are black now but I want to polish them - maybe we shoulda swapped :lol:

 

[kwplot34]

Looks good Kev. My sill trims are black now but I want to polish them - maybe we shoulda swapped :lol:

:twitchamm now you bring it up ush: i really wanted to pc mine but some of the parts would not fit in the oven:confused2:

 

[saudivette]

Looks good Kev. My sill trims are black now but I want to polish them - maybe we shoulda swapped :lol:

:twitchamm now you bring it up ush: i really wanted to pc mine but some of the parts would not fit in the oven:confused2:

When I was knee deep in parts I was powder coating for the BOSS, my son and his friend were watching me when the friend asked if I was going to pc the whole car :lol:

Had to explain to him how it worked/oven size/fiberglass car etc...

 

[enkeivette]

I took them down to metal, I plan to spray epoxy then black then clear over them. Rocker panels too.

 

[kwplot34]

That should look real good,post up some pics when you get them painted.

 

[mrvette]

Looks good Kev. My sill trims are black now but I want to polish them - maybe we shoulda swapped :lol:

:twitchamm now you bring it up ush: i really wanted to pc mine but some of the parts would not fit in the oven:confused2:

When I was knee deep in parts I was powder coating for the BOSS, my son and his friend were watching me when the friend asked if I was going to pc the whole car :lol:

Had to explain to him how it worked/oven size/fiberglass car etc...

I would LOVE to PC my entire vette, black crinkle....that would look cool....