Pacha
Active member
Finally!!! after 4 years I´ve started to put it back together. :trumpet:
Here are the Rod and bracket I made to replace the factory J. Now it is easier to regulate.
The “standard” method in paint removal, Window scraper and heat gun.

It takes a long time to remove the 3 coats of paint (original orange, silver and red). At least I could seen that the fiberglass was in a really good shape.

Chassis after Blasting and paint, as it came from the blaster shop (And my very own desing of chassis dolly).


Pedal box with modify brake pedal and clutch pedal (I am converting from auto to manual).

Chasis gusets:

Half Shaft with new u-joints (do I have to balance it?).

Chassis with some parts mounted (Can you see the Borgeson steering box!! :drink

More pics soon!!
Here are the Rod and bracket I made to replace the factory J. Now it is easier to regulate.

The “standard” method in paint removal, Window scraper and heat gun.

It takes a long time to remove the 3 coats of paint (original orange, silver and red). At least I could seen that the fiberglass was in a really good shape.

Chassis after Blasting and paint, as it came from the blaster shop (And my very own desing of chassis dolly).


Pedal box with modify brake pedal and clutch pedal (I am converting from auto to manual).

Chasis gusets:

Half Shaft with new u-joints (do I have to balance it?).

Chassis with some parts mounted (Can you see the Borgeson steering box!! :drink


More pics soon!!