Hey Red

[Jclgodale3]

Hey Red? Any Update?...has the pansy ponied up the heads or the money yet? I noticed he still isn't posting over at the #2 site so am assuming he hasn't?

 

[TimAT]

Someone actually started a thread asking about the clown-

 

[Jclgodale3]

Someone actually started a thread asking about the clown-

Yep. I noticed how quickly they shut it down. They surprisingly, for the first time, admitted he was under moderation. Surprisingly as well, the few that posted made excuses for him not posting because he is busy doing this or that? Wine drinkers for sure:lol:

 

[big2bird]

Someone actually started a thread asking about the clown-

Yep. I noticed how quickly they shut it down. They surprisingly, for the first time, admitted he was under moderation. Surprisingly as well, the few that posted made excuses for him not posting because he is busy doing this or that? Wine drinkers for sure:lol:

Never fear. He is helping Curtis this weekend, and that will be the "end run.":kissass:

 

[Jclgodale3]

Someone actually started a thread asking about the clown-

Yep. I noticed how quickly they shut it down. They surprisingly, for the first time, admitted he was under moderation. Surprisingly as well, the few that posted made excuses for him not posting because he is busy doing this or that? Wine drinkers for sure:lol:

Never fear. He is helping Curtis this weekend, and that will be the "end run.":kissass:

Wow...2 Superhero's wrenching together on the same car...priceless

 

[SmokinBBC]

Someone actually started a thread asking about the clown-

Yep. I noticed how quickly they shut it down. They surprisingly, for the first time, admitted he was under moderation. Surprisingly as well, the few that posted made excuses for him not posting because he is busy doing this or that? Wine drinkers for sure:lol:

Never fear. He is helping Curtis this weekend, and that will be the "end run.":kissass:

:rofl::rofl::rofl::rofl:

I asked a question there a couple of days ago about some kool mat that a guy put in...I got a reponse "sha". which I'm assuming means stay the hell away?

 

[mdbelanger]

I had a good laugh with the small print added to this.

http://forums.corvetteforum.com/c3-parts-for-sale-wanted/2168746-f-s-aluminum-vortec-heads.html

Think I'll have to bump the boy to the top a few times.:bump::stirpot::stirpot:

Michael.

 

[SmokinBBC]

I had a good laugh with the small print added to this.

http://forums.corvetteforum.com/c3-parts-for-sale-wanted/2168746-f-s-aluminum-vortec-heads.html

Think I'll have to bump the boy to the top a few times.:bump::stirpot::stirpot:

Michael.

:rofl::rofl::rofl::rofl::rofl::rofl::rofl:

 

[Arthur Brown]

What? He still hasn' refunded the money? What a scam artist.
How can other members defend this scumbag?
Too busy ? What a joke.

 

[Arthur Brown]

What? He still hasn' refunded the money? What a scam artist.
How can other members defend this scumbag?
Too busy ? What a joke.
So. From what I read on these forums you guys here are the bad boys ? LOL

 

[Douglas Mariani]

What? He still hasn' refunded the money? What a scam artist.
How can other members defend this scumbag?
Too busy ? What a joke.
So. From what I read on these forums you guys here are the bad boys ? LOL

No there the ............."SUPER GUYS" LOL

 

[MYBAD79]

What? He still hasn' refunded the money? What a scam artist.

Doesn't look like he paid....

How can other members defend this scumbag?

That's a good question to ask those who support this.

From what I read on these forums you guys here are the bad boys ? LOL

Depends on who you believe :trumpet:

 

[mrvette]

What? He still hasn' refunded the money? What a scam artist.

Doesn't look like he paid....

How can other members defend this scumbag?

That's a good question to ask those who support this.

From what I read on these forums you guys here are the bad boys ? LOL

Depends on who you believe :trumpet:

For sure, and DB wasn't the only one passing out bad info, either....

the electrical stuff is a joke....some other stuff is too, I go there mainly for humor anymore....like the OT and PRC stuffs....

:harhar:

 

[JPhil]

DAH-dada-DAH ---stand by for A Direct Quote from a Genuine (he says so)Super Hero! Ready? Here goes:

"The man I bought these from is a machine shop owner, and he does the machine work pre-sale. He gets the heads as a bare casting from Procomp. They are an overseas manufacturer...I am not sure from where...maybe Aussie, and then Bryan assembles the heads using quality USA parts and does his own machine work to improve on them."

""An overseas manufacturer.....I am not sure from where..."" (MY F**CKING ASS "not sure where"--we ALL know where 'Procomp' comes from, dude!) ""...maybe Aussie?"" ('Scuse me, but, ---Wayne, I have never heard of any Australian manufacturers of fancy-ass SBC cylinder heads, can you enlighten us? There is however a certain country which is on the Pacific rim, closer to Australia than to USA, which manufactures a lot of stuff--can't quite recall the name of this country at the moment but I'm sure it will come to me....) ""Then XXXXX assembles the heads using QUALITY USA PARTS"" (shipped in bulk from same said un-named country and then repackaged in BOXES made in USA by illegal aliens from yet another un-named country) ""...and does his own machine work to improve them....""

So in other words, they are imported, unfinished cores which need rebuilding by a local machine shop to make them work??? HEY WHERE CAN I SIGN UP TO GET SOME??

:bonkers:

(how much Xanax is 'this guy' taking anyway?)

 

[JPhil]

So. From what I read on these forums you guys here are the bad boys ? LOL

BWAA-HA-HA-HA-HA-HAAAAAA!!!!

Silly little human!!!

This is the forum created by the Evil Villians, whom the Superheros vanquished long ago from the land of goodness & suckers.
It appears that the League of Superheros, operating from their Secret Headquarters deep beneath a small midwestern town, are running into some trouble. The Evil Villians are wringing their hands with glee, but who knows what new twists the Superheros will come up with in the next chapter? :kissass:
We can only wait and see!

 

[redvetracr]

I had a good laugh with the small print added to this.

http://forums.corvetteforum.com/c3-parts-for-sale-wanted/2168746-f-s-aluminum-vortec-heads.html

Think I'll have to bump the boy to the top a few times.:bump::stirpot::stirpot:

Michael.

sanitized and locked...did you really think they would leave your "little" bump in the road??

 

[Jclgodale3]

So. From what I read on these forums you guys here are the bad boys ? LOL

BWAA-HA-HA-HA-HA-HAAAAAA!!!!

Silly little human!!!

This is the forum created by the Evil Villians, whom the Superheros vanquished long ago from the land of goodness & suckers.
It appears that the League of Superheros, operating from their Secret Headquarters deep beneath a small midwestern town, are running into some trouble. The Evil Villians are wringing their hands with glee, but who knows what new twists the Superheros will come up with in the next chapter? :kissass:
We can only wait and see!

Umm...Superhero's don't LIE on public forums ,Cheat and remains to be seen...steal on public forums, do they? I'm crushed to learn this. My Superhero has lost his glamour

 

[Jclgodale3]

I had a good laugh with the small print added to this.

http://forums.corvetteforum.com/c3-parts-for-sale-wanted/2168746-f-s-aluminum-vortec-heads.html

Think I'll have to bump the boy to the top a few times.:bump::stirpot::stirpot:

Michael.

sanitized and locked...did you really think they would leave your "little" bump in the road??

Wonder what the punishment was for Red and the superhero for not resolving the problem in the 5 days alotted? Apparently not banning since the hero is still on there every day since...but where is Red? Anyone heard from him lately?:tomato:

 

[Twin_Turbo]

DAH-dada-DAH ---stand by for A Direct Quote from a Genuine (he says so)Super Hero! Ready? Here goes:

"The man I bought these from is a machine shop owner, and he does the machine work pre-sale. He gets the heads as a bare casting from Procomp. They are an overseas manufacturer...I am not sure from where...maybe Aussie, and then Bryan assembles the heads using quality USA parts and does his own machine work to improve on them."

""An overseas manufacturer.....I am not sure from where..."" (MY F**CKING ASS "not sure where"--we ALL know where 'Procomp' comes from, dude!) ""...maybe Aussie?"" ('Scuse me, but, ---Wayne, I have never heard of any Australian manufacturers of fancy-ass SBC cylinder heads, can you enlighten us? There is however a certain country which is on the Pacific rim, closer to Australia than to USA, which manufactures a lot of stuff--can't quite recall the name of this country at the moment but I'm sure it will come to me....) ""Then XXXXX assembles the heads using QUALITY USA PARTS"" (shipped in bulk from same said un-named country and then repackaged in BOXES made in USA by illegal aliens from yet another un-named country) ""...and does his own machine work to improve them....""

So in other words, they are imported, unfinished cores which need rebuilding by a local machine shop to make them work??? HEY WHERE CAN I SIGN UP TO GET SOME??

:bonkers:

(how much Xanax is 'this guy' taking anyway?)

This guy is so full of shit. He also tried to sell them as Dart cast heads which they are not. They are Chinese castings, using the same design mold as the patriot, strike force, american eagle, superflow and all those other no name brands. Look at the flange shapes and all. You can spot these a mile away, they're all the same.

Now, V-Twin once pointed out to the golden boy that they were Chinese. He then said he didn't know that. So now they are aussie heads? They are not. The aussie heads were the pro action/pro topline heads with the kiwi logo and they were pretty damn good. They were bought out by comp under their RHs (racing head service) name. Another company called ProComp Electronics started to market these heads too. They are NOT the same heads, the pro comp is chinese stuff. They are the same design head as these others. All of those heads with the trapezoid shaped center in the manifold flange and the large exhaust face on the head are chinese.

Now, the bullshit story about bare castings needing machining. V-Twin back then pointed out the heads were ProComp heads and that they even have the laser engraving on the valve over flange, the COMPLETE
product number denoting which exact heads these are: PC3002-0711-0689

Now, this is PROOF these are not bare castings. There is no machine shop who final machines these (and machining them in the US would push the price tag way beyond what these go for)...so this alleged machine shop gets his crate full of bare castings, then machines them himself and engraves the pro comp number in them?

My BS meter is through the roof again. BTW, these heads can be bought on the bay all day any day for 750 and probably less... BRAND NEW!! NO HASSLES. So dilweed_boy is full of shit yet again.

Now, there's some other stuff going on with those heads in his pic. Anyone took a closer look? Look at where the bolt holes are for the valve cover gaskets. They are not even close to center in the casting boss and on the manifold side they are almost against the side, no flesh left what so ever!!

I found the other thread:

http://forums.corvetteforum.com/c3-parts-for-sale-wanted/2160372-f-s-aluminum-vortec-heads.html

 

[big2bird]

Just another BS lie. I just don't know why this stuff goes sight unseen. It just boggles my mind. COULD be the venders there operate off the same BS truith spinning technology too.